Ice; Sntp - Polycom CX5500 Administrator's Manual

Polycom CX5500 Unified Conference Station Administrator's Guide
<ice/>
The <ice/> parameters in the table
Ice Parameters
Parameter
tcpIpApp.ice.mode
Turn SIP ICE negotiation on or off. If using Lync Server 2010, set to MSOCS to enable ICE.
tcpIpApp.ice.password
Enter the password to authenticate to the TURN server.
tcpIpApp.ice.stun.server
Enter the IP address of the STUN server.
tcpIpApp.ice.stun.udpPort
The UDP port number of the STUN server.
tcpIpApp.ice.tcp.enabled
If 0, TCP is disabled. If 1, TCP is enabled.
tcpIpApp.ice.turn.callAdmissionControl.enabled
tcpIpApp.ice.turn.server
Enter the IP address of the TURN server.
tcpIpApp.ice.turn.tcpPort
The UDP port number of the TURN server.
tcpIpApp.ice.turn.udpPort
The UDP port number of the TURN server.
tcpIpApp.ice.username
Enter the user name to authenticate to the TURN server.
<sntp/>
The table Simple Network Time Protocol (SNTP) Parameters
(SNTP) parameters used to set up time synchronization and daylight savings time. The default values will
enable and configure daylights savings time (DST) for North America.
Daylight savings time defaults:
●
Do not use fixed day, use first or last day of week in the month.
Polycom, Inc.
Ice Parameters enable you to set the STUN/TURN/ICE feature.
Permitted Values
Disabled, Standard,
MSOCS
String
String
1-65535
0 or 1
String
1-65535
1-65535
String
Default
Disabled
Null
Null
3478
1
1
Null
443
443
Null
lists the Simple Network Time Protocol
1.1.0
313