Polycom CX5500 Administrator's Manual page 200

Polycom CX5500 Unified Conference Station Administrator's Guide
●
More than 100 out-of-range values, or
●
More than 100 invalid values.
To update the configuration files to use the correct parameters, see
Values for details.
Line: Unregistered
This message displays if a line fails to register with the call server.
Login credentials have failed. Please update them if information is incorrect.
This message displays when the user enters incorrect login credentials (Status > Basic > Login
Credentials).
Missing files, config. reverted
This message displays when errors in the configuration and a failure to download the configuration files
force the phone to revert to its previous (known) condition with a complete set of configuration files. This
will also display if the files listed in the <MAC Address>.cfg file are not present on the provisioning
server.
Network Authentication Failure
This message displays if 802.1X authentication with the CX5500 system fails. The error codes shown in
the table Event Codes and Descriptions
selected—and in the log files:
Event Codes and Descriptions
Event Code Description
1 Unknown events
2 Mismatch in EAP Method type
Authenticating server's list of EAP methods does not
match with clients'.
30xxx TLS Certificate failure
The TLS certificate-related failures. "xxx" when having a
non-zero value, is the standard TLS alert message
code. For example, if a bad/invalid certificate (on the
basis of its signature and/or content) is presented by the
phone, "xxx" will be 042. If the exact reason for the
certificate being invalid is not known, then the generic
certificate error code will be xxx=000.
Polycom, Inc.
display on the phone's screen—if the Details soft key is
Change Configuration Parameter
Comments
This includes any event listed in
this table.
See section 7.2 of RFC 2246
further TLS alert codes and error
codes.
1.1.0
for
200