Polycom CX5500 Administrator's Manual page 190

Polycom CX5500 Unified Conference Station Administrator's Guide
The CX5500 system supports the following EAP authentication methods:
●
EAP-TLS (requires Device and CA certificates)
●
EAP-PEAPv0/MSCHAPv2 (requires CA certificates)
●
EAP-PEAPv0/GTC (requires CA certificates)
●
EAP-TTLS/MSCHAPv2 (requires CA certificates)
●
EAP-TTLS/GTC (requires CA certificates)
●
EAP-FAST (optional Protected Access Credential (PAC) file, if not using in-band provisioning)
●
EAP-MD5
To set up an EAP method that requires a Device or CA certificate, you need to configure TLS Platform
Profile 1 or TLS Platform Profile 2 to use with 802.1X. You can use the parameters in the table
802.1X Authentication Parameters
Profiles.
Web Info: EAP Authentication Protocol
For more information, see
Set 802.1X Authentication Parameters
Central Provisioning Server
Enable or disable the 802.1X feature
Specify the identity (username) for authentication
Specify the 802.1X EAP method
Specify the password for authentication
To enable EAP In-Band Provisioning for EAP-FAST
Specify a PAC file for EAP-FAST (optional)
Specify the optional password for the EAP-FAST PAC file
Web Configuration Utility
To enable and configure the 802.1X feature, navigate to Settings > Network > Ethernet and expand the Ethernet
802.1X menu.
Local Phone User Interface
To enable 802.1X authentication, navigate to the Ethernet Menu (Settings > Advanced > Admin Settings >
Network Configuration > Ethernet Menu) and select 802.1X Auth.
To configure the 802.1X feature, navigate to the Ethernet Menu and select 802.1X Menu (802.1X Auth must be
set to enable first).
Polycom, Inc.
to configure 802.1X Authentication. For more information see
RFC 3748: Extensible Authentication
template >
device.cfg >
device.cfg >
device.cfg >
device.cfg >
device.cfg >
device.cfg >
device.cfg >
Protocol.
parameter
device.net.dot1x.enabled
device.net.dot1x.identity
device.net.dot1x.method
device.net.dot1x.password
device.net.dot1x.eapFastInBandProv
device.pacfile.data
device.pacfile.password
1.1.0
Set
TLS
190