Polycom CX5500 Administrator's Manual page 254

Polycom CX5500 Unified Conference Station Administrator's Guide
Parameter
dialplan.routing.server.x.port
The port of a SIP server that will be used for routing calls
dialplan.routing.server.x.transport
The dns lookup of the first server to be dialed will be used, if there is a conflict with the others.
For example, if dialplan.routing.server.1.transport="UDPOnly" and
dialplan.routing.server.2.transport = "TLS", then UDPOnly is used.
dialplan.userDial.timeOut
This parameter specifies the time in seconds that the phone waits before dialing a number you enter while the
phone is on hook. You can apply
up.IdleTimeOut. Note that you need to restart or reboot to apply changes to this parameter.
dialplan.x.conflictMatchHandling
This is the per-registration parameter of
priority over the general parameter,
1
Change causes phone to restart or reboot.
Per-registration dial plan configuration is also supported and paramters are listed in the table
Registration Dial Plan (Digit Map)
provided in the table Dial Plan (Digit Map)
the general parameters where x is the registration number (for example,
dialplan.x.applyToTelUriDial overrides dialplan.applyToTelUriDial for registration x).
For the CX500 system, x=1-16.
Per-Registration Dial Plan (Digit Map) Parameters
Parameter
dialplan.conflictMatchHandling
dialplan.x.applyToCallListDial
dialplan.x.applyToDirectoryDial
dialplan.x.applyToForward
dialplan.x.applyToTelUriDial
dialplan.x.applyToUserDial
dialplan.x.applyToUserSend
1
dialplan.x.digitmap
Polycom, Inc.
1
1
dialplan.userDial.timeOut
dialplan.conflictMatchHandling
dialplan.conflictMatchHandling
Parameters. The descriptions for these per-registration parameters are
Parameters. Note that the per-registration parameters override
1
1
1
1
1
Permitted Values
1 to 65535
DNSnaptr, TCPpreferred,
UDPOnly, TLS, TCPOnly
0 – 99 seconds
only when its value is lower than
0 or 1
.
Permitted Values
0 or 1
0 or 1
0 or 1
0 or 1
0 or 1
0 or 1
0 or 1
string - max number of
characters 2560
1.1.0
Default
5060
DNSnaptr
Generic Profile=0
Generic Profile=0
. This parameter takes
Per
Default
Generic Profile=0
Lync Profile=1
1
0
0
1
1
1
Null
254