Enable Automatic Off-Hook Call Placement - Polycom CX5500 Administrator's Manual

Polycom CX5500 Unified Conference Station Administrator's Guide
This example configuration will result in the following graphic display background on the phone screen.
Note that line and soft key labels will display over the background image.

Enable Automatic Off-Hook Call Placement

You can configure the system to automatically place a call to a specified number when you go off-hook.
This feature is sometimes referred to as hot dialing. The phone goes off-hook when you press the New
Call soft key. As shown in the table
hook call contact and enable or disable the feature for specific line registrations.
Enable Automatic Off-Hook Call Placement
Central Provisioning Server
Specify the contact to dial when the phone goes off-hook
Enable or disable automatic off-hook call placement on registration
x
Polycom, Inc.
Enable Automatic Off-Hook Call Placement, you can specify an off-
template > parameter
reg-advanced > call.autoOffHook.x.contact
reg-advanced > call.autoOffHook.x.enabled
1.1.0
90