Polycom CX5500 Administrator's Manual page 181

Polycom CX5500 Unified Conference Station Administrator's Guide
microbrowser and browser, and for 802.1X, LDAP, and SIP authentication. Some applications, such as
Syslog, can only use a TLS Platform Profile, not a TLS Application Profile. See
applications.
For more information on device (or digital) certificates installed on the phones at the factory, see
Certificates.
Web Info: Using Custom CA Certificates
For more information on using custom certificates, see
Certificates With Polycom
The following table shows parameters for TLS Platform Profile 1. To configure TLS Platform Profile 2, use
a 2 at the end of the parameter instead of a 1. For example, set
device.sec.TLS.profile.caCertList2 instead of .caCertList1.
TLS Platform Profile and TLS Application Profile Parameters
Central Provisioning Server
TLS Platform Profile Parameters (use 2 at the end of each parameter (instead of 1) to set up platform profile 2)
Specify which CA certificates to use
Specify the cipher suite
Select the default cipher suite or a custom cipher suite
Specify a custom certificate
Specify which device certificates to use
TLS Application Profile Parameters
Specify which CA certificates to use
Specify the cipher suite
Select the default cipher suite or a custom cipher suite
Specify a custom certificate
Specify which device certificates to use
Specify the custom device key
Web Configuration Utility
Polycom, Inc.
Phones.
<TLS/> for the list of
Technical Bulletin 17877: Using Custom
template > parameter
device.cfg >
device.sec.TLS.profile.caCertList1
device.cfg >
device.sec.TLS.profile.cipherSuite1
device.cfg >
device.sec.TLS.profile.cipherSuiteDefault1
device.cfg >
device.sec.TLS.customCaCert1
device.cfg >
device.sec.TLS.profile.deviceCert1
site.cfg >sec.TLS.profile.x.caCert.*
site.cfg >sec.TLS.profile.x.cipherSuite
site.cfg
>sec.TLS.profile.x.cipherSuiteDefault
site.cfg > sec.TLS.customCaCert.x
site.cfg > sec.TLS.profile.x.deviceCert
site.cfg > sec.TLS.customDeviceKey.x
1.1.0
Digital
181