Upgrade; Video - Polycom CX5500 Administrator's Manual

Polycom CX5500 Unified Conference Station Administrator's Guide
Parameter
1
up.warningLevel
If 0, the phone's warning icon and a pop-up message display on the phone for all warnings. If 1, the warning icon
and pop-up messages are only shown for critical warnings. Note: All warnings are listed in the Warnings menu
(navigate to Settings > Status > Diagnostics > Warnings on the phone).
up.welcomeSoundEnabled
If 0, the welcome sound is disabled. If 1, the welcome sound is enabled and played each time the phone reboots.
up.welcomeSoundOnWarmBootEnabled
If 0, the welcome sound is played when the phone powers up (cold boot), but not after it restarts or reboots
(warm boot). If 1, the welcome sound plays each time the phone powers up, reboots, or restarts.
1
Change causes phone to restart or reboot.
<upgrade/>
Use the parameters listed in the table
download server and the Polycom UC Software download server for the phone to check when searching
for software upgrades.
Upgrade Server Parameters
Parameter
upgrade.custom.server.url
The URL of a custom download server.
upgrade.plcm.server.url
The URL of the Polycom UC Software download server.
<video/>
The parameters in the table
This parameter also includes:
●
<camera/>
●
<codecs/>
Polycom, Inc.
Permitted Values
0 to 2
1
0 or 1
1
0 or 1
Upgrade Server Parameters
Permitted Values
URL
URL
General Video Parameters
to specify the URL of a custom
Default
Null
http://downloads.polycom.com/voice/software/
are supported on the CX5500 system.
1.1.0
Default
0
1
0
322