Polycom CX5500 Administrator's Manual page 251

Polycom CX5500 Unified Conference Station Administrator's Guide
Parameter
device.sec.TLS.profile.profileSelection.dot1x
Choose the TLS Platform Profile to use for 802.1X, either TLS Platform Profile 1 or TLS Platform Profile 2.
device.sec.TLS.profileSelection.provisioning
The TLS Platform Profile to use for provisioning, either TLS Platform Profile 1 or TLS Platform Profile 2.
device.sec.TLS.profileSelection.syslog
The TLS Platform Profile to use for syslog, either TLS Platform Profile 1 or TLS Platform Profile 2.
device.sec.TLS.prov.strictCertCommonNameValidation
If set to 1, provisioning always verifies the server certificate for commonName/SubjectAltName match with the
server hostname that the phone is trying to connect.
device.sec.TLS.syslog.strictCertCommonNameValidation
If set to 1, syslog always verifies the server certificate for commonName/SubjectAltName match with the server
hostname that the phone is trying to connect.
device.sntp.gmtOffset
The GMT offset—in seconds—to use for daylight savings time, corresponding to -12 to +13 hours.
device.sntp.serverName
The SNTP server from which the phone will obtain the current time.
device.syslog.facility
A description of what generated the log message. For more information, see section 4.1.1 or
device.syslog.prependMac
If 1, the phone's MAC address is pre-pended to the log message sent to the syslog server.
device.syslog.renderLevel
Specify the logging level that will display in the syslog. Note that when you choose a log level, you are including
all events of an equal or greater severity level and excluding events of a lower severity level. The logging level
you choose determines the lowest severity of events that will be logged.
0 or 1: SeverityDebug(7). 2 or 3: SeverityInformational(6). 4: SeverityError(3). 5: SeverityCritical(2). 6:
SeverityEmergency(0).
device.syslog.serverName
The syslog server IP address or domain name string.
device.syslog.transport
The transport protocol that the phone will use to write to the syslog server. If set to None, transmission is turned
off but the server address is preserved.
Polycom, Inc.
1
1
1
1
Permitted Values
PlatformProfile1,
PlatformProfile2
PlatformProfile1,
PlatformProfile2
PlatformProfile1,
PlatformProfile2
0 or 1
0 or 1
-43200 to 46800
dotted-decimal IP
address or domain name
string
0 to 23
RFC
0 or 1
0 to 6
dotted-decimal IP
address OR domain
name string
None, UDP, TCP, TLS
1.1.0
Default
Null
Null
Null
1
1
Null
Null
Null
3164.
Null
Null
Null
Null
251