Sec; Encryption - Polycom CX5500 Administrator's Manual

Polycom CX5500 Unified Conference Station Administrator's Guide
<sec/>
The parameters listed in the table
The configuration parameter is defined as follows:
General Security Parameters
Parameter
1
sec.tagSerialNo
If 0, the phone does not advertise its serial number (MAC address) through protocol signaling. If 1, the phone may
advertise its serial number through protocol signaling.
1
Change causes phone to restart or reboot.
This parameter also includes:
●
<encryption/>
●
<pwd/><length/>
●
<srtp/>
●
<dot1x><eapollogoff/>
●
●
<hostmovedetect/>
●
<TLS/>

<profile/>

<profileSelection/>
<encryption/>
The table File Encryption Parameters
File Encryption Parameters
Parameter
sec.encryption.upload.callLists
The encryption on the phone-specific call lists that is uploaded to the provisioning server.
If 0, the call list is uploaded unencrypted regardless of how it was downloaded, the directory replaces whatever
phone-specific call list is on the server, even if the file on the server is encrypted.
If 1, the call list is uploaded encrypted regardless of how it was downloaded. The file replaces any existing
phone-specific call lists file on the server.
Polycom, Inc.
General Security Parameters
Permitted Values
0 or 1
lists available encryption parameters.
Permitted Values
1
0 or 1
affects the security features of the phone.
Default
0
Default
0
1.1.0
302