Polycom CX5500 Administrator's Manual page 300

Polycom CX5500 Unified Conference Station Administrator's Guide
Note: Silent Ring
Silent ring will provide a visual indication of an incoming call, but no audio indication.
Sampled audio files 1 to 10 all use the same built-in file unless that file has been replaced with a
downloaded file. For more information, see <saf/>.
The table Miscellaneous Pattern Names
Miscellaneous Pattern Names
Miscellaneous pattern name
instant message
local hold notification
message waiting
negative confirmation
positive confirmation
remote hold notification
welcome
<rt/>
Ringtone is used to define a simple class of ring to be applied based on some credentials that are usually
carried within the network protocol. The ring class includes parameters such as call-waiting and ringer
index, if appropriate. The ring class can use one of four types of ring that are defined as follows:
●
ring Play a specified ring pattern or call waiting indication
●
visual Provide only a visual indication (no audio) of an incoming call, no ringer needs to be
specified
●
answer Provide auto-answer on an incoming call
●
ring-answer Provide auto-answer on an incoming call after a certain number of rings
Note: Using the Answer Ring Type
The auto-answer on incoming call is currently only applied if there is no other call in progress on the
phone at the time.
The phone supports the following ring classes: default, visual, answerMute, autoAnswer,
ringAnswerMute, ringAutoAnswer, internal, external, emergency, precedence, splash, and
custom<y> where y is 1 to 17.
Polycom, Inc.
shows the miscellaneous patterns and their descriptions:
Description
New instant message
Local hold notification
New message waiting indication
Negative confirmation
Positive confirmation
Remote hold notification
Welcome (boot up)
1.1.0
300