Polycom CX5500 Administrator's Manual page 282

Polycom CX5500 Unified Conference Station Administrator's Guide
Parameter
prov.login.localPassword
The password used to validate the user login. It is stored either as plain text or encrypted (an SHA1 hash).
prov.login.persistent
If 0, users are logged out if the handset reboots. If 1, users remain logged in when the phone reboots.
prov.login.required
If 1, a user must log in when the login feature is enabled. If 0, the user does not have to log in.
prov.loginCredPwdFlushed.enabled
If 1, when a user logs in or logs out, the login credential password is reset. If 0, the login credential password is
not reset.
prov.polling.enabled
If 0, the provisioning server is not automatically polled for upgrades. If 1, the provisioning server is polled.
prov.polling.mode
The polling mode.
abs The phone polls every day at the time specified by prov.polling.time.
rel The phone polls after the number of seconds specified by prov.polling.period.
random The phone polls at random between a starting time set in prov.polling.time and an end time set in
prov.polling.timeRandomEnd.
Note that if you set the polling period in prov.polling.period to a time greater than 86400 seconds (one
day) polling occurs on a random day within that polling period (meaning values such as 86401 would be over 2
days) and only between the start and end times. The day within the period is decided based upon the phones
mac address and will not change with a reboot whereas the time within the start and end is calculated again with
every reboot.
prov.polling.period
The polling period in seconds. The polling period is rounded up to the nearest number of days in absolute and
random mode. In relative mode, the polling period starts once the phone boots. In random mode, if this is set to a
time greater than 86400 (one day) polling occurs on a random day based on the phone's MAC address.
prov.polling.time
The polling start time. Used in absolute and random modes.
prov.polling.timeRandomEnd
The polling stop time. Only used in random mode.
prov.quickSetup.enabled
If 0, the quick setup feature is disabled. If 1, the quick setup feature is enabled.
prov.startupCheck.enabled
If 0, the phone is not provisioned at startup. If 1, the phone is provisioned at start up. All configuration files,
licenses, and overrides are downloaded even if the software changes. (The previous behavior was to reboot as
soon as the phone determined that software changed.)
1
Change causes phone to restart or reboot.
Polycom, Inc.
Permitted Values
String
0 or 1
0 or 1
0 or 1
0 or 1
abs, rel, random
integer > 3600
hh:mm
hh:mm
0 or 1
0 or 1
1.1.0
Default
123
0
0
1
0
abs
86400
03:00
Null
0
1
282