Level/> <Change/>And<Render - Polycom CX5500 Administrator's Manual

Polycom CX5500 Unified Conference Station Administrator's Guide
Each event in the log contains the following fields separated by the | character:
●
time or time/date stamp
1-5 character component identifier (such as "so")
●
●
event class
●
cumulative log events missed due to excessive CPU load
●
free form text - the event description
Three formats available for the event timestamp are listed in the table
Event Timestamp Formats
Type
0 - seconds.milliseconds
1 - absolute time with minute resolution
2 - absolute time with seconds resolution
<level/> <change/>and<render/>
This configuration parameter is defined in the table
Logging Level, Change, and Render Parameters
Parameter
log.level.change.xxx
Control the logging detail level for individual components. These are the input filters into the internal memory-
based log system. Possible values for xxx are acom, ares, app1, bluet, bdiag, brow, cap, cdp, cert, cfg, cipher,
clink, clist, cmp, cmr, copy, curl, daa, dbs, dbuf, dhcpc, dis, dock, dot1x, dns, drvtbt, ec, efk, ethf, h323, hset, httpa,
httpd, hw, ht, ib, key, ldap, lic, lldp, loc, log, mb, mobil, net, niche, oaip, ocsp, osd, pcap, pcd, pdc, peer, pgui, pmt,
pnetm, poll, pps, pres, pstn, push, pwrsv, rdisk, res, rtos, rtls, sec, sig, sip, slog, so, soem, srtp, sshc, ssps, style,
sync, sys, ta, task, tls, trace, ttrs, usb, usbio, util, utilm, wdog, wlan, wmgr, and xmpp.
log.render.file
Set to 1. Polycom recommends that you do not change this value.
log.render.file.size
Maximum size of flash memory for logs in Kbytes. When this size is about to be exceeded, the phone will upload
all logs that have not yet been uploaded, and erase half of the logs on the phone. The administrator may use Web
browser to read all logs on the phone.
log.render.file.upload.append
If set to 1, use append mode when uploading log files to server.
Note: HTTP and TFTP don't support append mode unless the server is set up for this.
Polycom, Inc.
Example
011511.006 -- 1 hour, 15 minutes, 11.006 seconds since
booting.
0210281716 -- 2002 October 28, 17:16
1028171642 -- October 28, 17:16:42
Logging Level Change and Render Parameters.
Permitted Values
0 to 6
0 or 1
positive integer, 1 to 180
0 or 1
Event Timestamp Formats.
Default
4
1
32
1
1.1.0
274