Polycom CX5500 Administrator's Manual page 53

Polycom CX5500 Unified Conference Station Administrator's Guide
●
Specified master configuration file You can specify a master configuration file in the
provisioning server address, for example, http://usr:pwd@server/dir/example1.cfg. The filename
must end with .cfg and be at least five characters long. If this file cannot be downloaded, the phone
will search for a per-phone master configuration file, described next.
Settings: Pay Attention to Per-Phone File Names
Do not use the following names as extensions for per-phone files: <MACaddress>-phone.cfg,
<MACaddress>-Web.cfg, <MACaddress>-app.log, , or <MACaddress>-license.cfg. These filenames
are used by the phone to store override files and logging information.
The figure Default Fields in the Master Configuration File
configuration file, 000000000000.cfg.
Default Fields in the Master Configuration File
The following describes each of the master configuration file XML attributes and the APPLICATION
directories.
●
APP_FILE_PATH Not applicable for CX5500 systems.
●
CONFIG_FILES Enter the names of your configuration files here as a comma-separated list.
Each file name has a maximum length of 255 characters and the entire list of file names has a
maximum length of 2047 characters, including commas and white space. If you want to use a
configuration file in a different location or use a different file name, or both, you can specify a URL
with its own protocol, user name and password, for example,
ftp://usr:pwd@server/dir/phone2034.cfg.
Polycom, Inc.
shows default available fields in the master
1.1.0
53