Polycom CX5500 Administrator's Manual page 245

Polycom CX5500 Unified Conference Station Administrator's Guide
Parameter
1
Change causes phone to restart or reboot
The table Device Parameters
Device Parameters
Parameter
device.auth.localAdminPassword
The phone's local administrative password. The minimum length is defined by sec.pwd.length.admin.
device.auth.localUserPassword
The phone user's local password. The minimum length is defined by sec.pwd.length.user.
device.baseProfile
Choose the Base Profile that the phone will operate with.
device.cma.mode
The mode the phone uses to retrieve the Polycom CMA server IP address. Auto The phone uses SRV lookup.
Disabled The phone does not contact the server. Static The phone uses the server name or IP address
specified in device.cma.serverName. Note: If you will modify this parameter, the phone will re-provision. The
phone may also reboot if the configuration on the CMA server has changed.
device.cma.serverName
Polycom CMA server name or IP address. Note: If you will modify this parameter, the phone will re-provision. The
phone may also reboot if the configuration on the CMA server has changed.
device.dhcp.bootSrvOpt
When the boot server is set to Custom or Custom+Option66, specify the numeric DHCP option that the phone
will look for.
device.dhcp.bootSrvOptType
The type of DHCP option in which the phone will look for its provisioning server (if
device.dhcp.bootSrvUseOpt is set to Custom). If IP, the IP address provided must specify the format of the
provisioning server. If String, the string provided must match one of the formats specified by
device.prov.serverName.
Polycom, Inc.
Permitted Values
lists each of the <device/> parameters that you can configure.
1
1
Default
Permitted Values
string (32 character max)
string (32 character max)
Generic, Lync
Static, Auto, Disabled
server name or IP
address
Null, 128 to 254
IP or String
1.1.0
Default
Null
Null
Null
Null
Null
Null
Null
245