Find Your Default System Password; Create Or Load A System Profile - Polycom CX5500 Administrator's Manual

Polycom CX5500 Unified Conference Station Administrator's Guide

Find Your Default System Password

To make changes to your Polycom CX5500 system using the Control Panel, enter the system password.
By default, the password is the 14-digit system serial number. You can find the serial number on the label
on the back panel of the power data box, as shown in the following figure.
Location of the Serial Number Label on the Power Data Box
After you enter the default password, you can change the system's password in the System tab in the
Control Panel.
To change the system default password:
1 In the Control Panel, click System > Password.
2 Enter the default password in the Old Password field.
3 Enter a new password for the system in the New Password field and retype the new password in
the Confirm New Password field.
4 Click Change Password.
Your new password is saved.

Create or Load a System Profile

The Profile Editor in the Control Panel enables you to change device settings and update software. You
can also save profiles onto your computer and load a profile to your CX5500 system.
To create a profile:
1 On your computer, start the CX5100/CX5500 Control Panel application.
The Control Panel opens and your device's system information displays in the System tab.
2 In the Control Panel, click Profile Editor.
The Enter Device Password dialog displays.
3 Enter the Device Password and click OK.
Note that the default device password is the system's serial number (see figure
Serial Number Label on the Power Data Box
Polycom, Inc.
for the location of the system's serial number).
1.1.0
Location of the
196