Suzuki SFV650 Service Manual page 300

1F-6 Engine Cooling System:
4) Remove the radiator assembly (5) by removing the
bolts (6).
6
3
4
2
6
5) Remove the cooling fan assembly (7).
6) Remove the cooling fan (8).
1
5
I944H1160005-02
6
5
I944H1160006-02
7
I944H1160007-02
8
I944H1160008-02
7) Disconnect the coupler (9) and remove the cooling
fan motor (10).
9
8) Remove the radiator under rubber (11).
Installation
Install the radiator/cooling fan motor in the reverse order
of removal. Pay attention to the following points:
• Tighten the cooling fan assembly mounting bolts (1) to
the specified torque.
Tightening torque
Cooling fan assembly mounting bolt (a): 6.5 N·m (
0.65 kgf-m, 4.5 lbf-ft)
1
• Connect the radiator hoses securely. Refer to "Water
Hose Routing Diagram (Page 1F-3)".
• Pour engine coolant. Refer to "Cooling System
Inspection in Section 0B (Page 0B-12)".
• Bleed air from the cooling circuit. Refer to "Cooling
System Inspection in Section 0B (Page 0B-12)".
10
I944H1160009-02
11
I944H1160010-02
(a)
1
(a)
I944H1160011-03