Repair Instructions; Ignition Coil Construction - Suzuki SFV650 Service Manual

Ignition Coil Construction

3
4
6
4
10
4
6
1. Ignition coil #1
2. Ignition coil #2
3. Regulator/rectifier
4. High-tension cord #1
5. High-tension cord #2
6. Reservoir tank inlet hose
7. Reservoir tank outlet hose

Repair Instructions

4
"C"
5
"B"
"A"
7
5
"B"
3
2
3
1
9
2
1
8
8. FC mark
9. RC mark
10. Clamp:
Contact the clamp with the horn bracket on its left side and clamp down
the high-tension cord at the marked position.
11. Clamp:
With the high-tension cord clamped and bent inward, check that it is
positioned within area "a".
"A": Pass the high-tension cord above the horn and reservoir tank inlet hose.
Do not contact the high-tension cord to the horn and radiator.
"B": Press firmly on the spark plug cap to fit it securely with mark " " on the
plug cap facing exhaust side.
"C": Route the high-tension cord on the cylinder head side relative to the
position of wiring harness or piping.
Ignition System: 1H-4
B944H11806011
11
" a "
2
3
1
I944H1180002-10