Handlebars Removal And Installation - Suzuki SFV650 Service Manual

6B-3 Steering / Handlebar:

Handlebars Removal and Installation

Removal
1) Remove the following parts from the left handlebar.
a) Rear view mirror (1)
b) Left handlebar switch box (2)
c) Handlebar balancer (3)
d) Grip rubber (4)
e) Disconnect the clutch cable (5)
f) Clutch lever (6)
4
3
2) Remove the following parts from the right handlebar.
a) Rear view mirror (7)
b) Right handlebar switch box (8)
c) Handlebar balancer (9)
d) Throttle grip (10)
e) Front brake master cylinder/Front brake lever
(11)
CAUTION
!
Do not turn the front brake master cylinder
upside down.
11
B944H16206003
1
5
2 6
I944H1620002-01
7
9
10
8
I944H1620003-01
3) Remove the caps and handlebar holder bolts.
Installation
Install the handlebars in the reverse order of removal.
Pay attention to the following points:
• Install the washers (1) and bolts (2) as shown in the
handlebar construction. Refer to "Handlebar
Construction (Page 6B-2)".
2
• Set the handlebars so that its punch mark "A" aligns
with the mating surface of the left handlebar holder.
• Set the handlebar holders with their punch marks "B"
forward.
"B"
I944H1620004-01
1
I944H1620005-01
"A"
I944H1620006-01