Suzuki SFV650 Service Manual page 505

20) Install the gasket (26) and the dowel pins (27).
CAUTION
!
Use the new gasket to prevent oil leakage.
21) Remove the bolt (28).
22) Install the clutch cover (29).
NOTE
When installing the clutch cover (29), align
the teeth of water pump drive (30) with the
water pump driven gear (31) by inserting a
suitable bar to the hole "C".
27
28
23) Tighten the clutch cover bolts.
NOTE
• Fit the clamp to the bolt "D".
• Route the drain hoses "E". Refer to "Water
Hose Routing Diagram in Section 1F
(Page 1F-3)" and "Fuel Tank Drain Hose
and Breather Hose Routing Diagram in
Section 1G (Page 1G-3)".
26
30
27
I944H1530046-02
"C"
29
31
I944H1530066-01
"D"
"E"
24) Connect the crankcase breather (PCV) hose (32), oil
cooler hose (33), water bypass hose (34) and
radiator outlet hose (35) securely. Refer to "Throttle
Body Construction in Section 1D (Page 1D-8)" and
"Water Hose Routing Diagram in Section 1F
(Page 1F-3)".
32
33
25) Pour engine oil and coolant. Refer to "Engine Oil and
Filter Replacement in Section 0B (Page 0B-10)" and
"Cooling System Inspection in Section 0B (Page 0B-
12)".
26) Install the left frame cover. Refer to "Exterior Parts
Removal and Installation in Section 9D (Page 9D-
4)".
Clutch: 5C-12
"E"
I944H1530047-04
34
35
I944H1530048-02