Front Cylinder
1) Remove the front cylinder (1) by removing the
cylinder nuts (2).
NOTE
Firmly grip the cylinder at both ends, and lift
it straight up. If the cylinder does not come
off, lightly tap it with a plastic hammer.
2) Remove the front cylinder gasket (3) and dowel pins
(4).
4
Front Piston
1) Place a clean rag over the cylinder base so as not to
2) Remove the piston pin circlip (1).
3) Draw out the piston pin (2) and remove the piston
1
2
I944H1140148-01
Rear Cylinder Head Cover
1) Remove the rear cylinder spark plugs. Refer to
3
2) Remove the rear cylinder head cover (1) and its
I944H1140149-01
Engine Mechanical:
drop the piston pin circlips into the crankcase.
(3).
NOTE
Scribe the cylinder number on the piston
head.
3
2
1
"Spark Plug Cap and Spark Plug Removal and
Installation in Section 1H (Page 1H-5)".
gasket.
1
1D-28
I944H1140150-01
I944H1140151-01