9D-5 Exterior Parts:
"A"
3
"A": Hooked point
Installation
Install the frame covers in the reverse order of removal.
Pillion Rider Handle and Rear Fender
Removal
1) Remove the seat.
2) Remove the frame cover(-s), left and right.
3) Remove the pillion rider handles (1) by removing the
caps and bolts (2).
2
1
I944H1940006-03
1
2
I944H1940007-02
4) Remove the rear frame cover (3).
5) Disconnect the clamps (4).
6) Disconnect the rear turn signal light lead wire
couplers (5), rear combination lead wire coupler (6)
and license plate light lead wire coupler (7).
4
6
5
7) Disconnect the seat lock cable (8).
3
I944H1940009-03
5
I944H1940010-03
4
7
I944H1940011-03
8
I944H1940012-03