Horn Removal And Installation - Suzuki SFV650 Service Manual

9C-8 Combination Meter / Fuel Meter / Horn:
3) Inspect the horn button for continuity with a tester.
If any abnormality is found, replace the left
handlebar switch assembly with a new one.
Refer to "Handlebars Removal and Installation in
Section 6B (Page 6B-3)".
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity ( )
4) After finishing the horn button inspection, reinstall
the removed parts.
Horn Inspection
1) Remove the horn. Refer to "Horn Removal and
Installation (Page 9C-8)".
2) Connect a 12 V battery to terminal "A" and terminal
"B". If the sound is not heard from the horn, replace
the horn with a new one.
3) Install the horn.

Horn Removal and Installation

Removal
1) Remove the left frame body cover. Refer to "Exterior
Parts Removal and Installation in Section 9D
(Page 9D-4)".
2) Disconnect the horn couplers (1).
3) Remove the horn (2) by removing the mounting bolt
(3).
I718H1930028-03
Installation
Install the horn in the reverse order of removal.
I944H1930023-01
3
1
2
B944H19306026
I944H1930024-01