Configuring The Wireless Settings - Ruckus Wireless ZoneFlex 7055 User Manual

Figure 38. The Ruckus Wireless AP login page
5 In User name, type super.
6 In Password, type sp-admin.
7 Click Login. The Web interface appears, displaying the Status > Device page.
8 Continue to

5. Configuring the Wireless Settings

To complete this step, configure the settings on the Common tab and at least one
Wireless # (WLAN Number) tab. These are the essential wireless settings that
enable wireless devices on the network to associate with the AP.
For your reference, the default wireless settings for the WLANs are listed in
Table 41. Default WLAN wireless settings
Setting
SSID (network name)
Encryption (security)
Default management IP address
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A
"5. Configuring the Wireless Settings"
Default Value
Wireless 1 to Wireless 8 (2.4 GHz Radio)
Wireless 9 to Wireless 16 (5 GHz Radio - only
available on dual radio APs)
Disabled on all WLANs
192.168.0.1
Installing the AP
Step 1: Preconfiguring the AP
below.
Table 41.
85