Configuring Device Settings - Ruckus Wireless ZoneFlex 7055 User Manual

Configuring Device Settings

Device settings refer to the device name, location, service provider login and other
settings. (Some settings are only available on certain AP models.)
1 Select Configuration > Device. The Configuration > Device page appears.
Figure 54. The Configuration > Device page
2 In Device Name, type a new name for the device or leave as is to accept the
default device name (RuckusAP). The device name identifies the AP among
other devices on the network.
3 Optionally, enter Device Location and GPS Coordinates to keep track of the
physical location of the AP.
4 In Temperature Update (specific models only), enter the interval (in seconds) to
record the internal temperature of the device.
5 Under LED Control (specific models only), check the Disable Status LED(s) box
to turn off the status LEDs. This can be useful when the AP is installed in a public
location, to avoid drawing attention to the AP.
6 Under Service Provider Login, change the login information as required:
• Username: Type the name that you want to use for logging into the Web
interface. The default user name is super.
• Current Password: When you are changing the password, enter the existing
password here.
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A
Configuring the AP
Configuring Device Settings
115