Ruckus Wireless ZoneFlex 7055 User Manual page 67

Table 34. R700 front panel elements
LED
Power LED
DIR LED
AIR LED
2.4GHz LED
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A
Description
• Off: Off.
• Red: Boot up in process.
• Green: On.
• Off: The AP is not being managed by ZoneDirector (standalone
mode).
• Green: The AP is being managed by ZoneDirector.
• Slow flashing green (one flash every two seconds): The AP is being
managed by ZoneDirector, but is currently unable to communicate
with ZoneDirector.
• Fast flashing green (two flashes every second): The AP is being
managed by ZoneDirector and is currently receiving configuration
settings (provisioning) or an image update.
• Off: The AP is operating as a Standalone or Root AP (RAP), or as
a non-mesh AP.
• Green: The AP is functioning as a Mesh AP (MAP), and the wireless
signal to its uplink AP is good.
• Fast flashing green (two flashes every second): The AP is
functioning as a Mesh AP (MAP), and the wireless signal to its
uplink AP is fair.
• Slow flashing green (one flash every two seconds): Mesh
networking is enabled, but the AP is still searching for a mesh
uplink.
• Off: The WLAN service is down.
• Green: The WLAN is up and at least one client is associated.
• Amber: The WLAN is up. No clients are associated.
Introducing the Ruckus Wireless AP
Getting to Know the AP Features
67