Configuring Common Wireless Settings - Ruckus Wireless ZoneFlex 7782 Installation Manual

Preparing the 7782 Access Point at the Depot and Shipping to the Field
Configuring the AP for Management by FlexMaster or for Standalone Operation

Configuring Common Wireless Settings

The settings on the Common tab are required to enable wireless devices to associate with
the AP. The default wireless settings on the AP are listed in
Table 4. Default wireless settings
Setting
SSID (network name)
Encryption (security)
Default management IP address
NOTE: ZoneFlex 7782 has one 2.4GHz radio and one 5GHz radio. The wireless settings
for each radio need to be configured separately on the Web interface. To configure the
2.4GHz radio settings, click Configuration > Radio 2.4G. To configure the 5GHz radio
settings, click Configuration > Radio 5G.
1. On the left menu of the Web interface, click Configuration > Radio {2.4G/5G}. The
Common page appears
Figure 14.
24
(Figure
The Configuration > Radio 2.4 > Common tab
Default Value
Wireless 1 to Wireless 8 (8 WLANs)
Disabled on all WLANs
192.168.0.1
14).
Table 4.