Viewing Flexmaster Management Status - Ruckus Wireless ZoneFlex 7055 User Manual

Viewing FlexMaster Management Status

If you configure the AP to be managed by FlexMaster, you can view the TR-069
Status section on the Administration > Management page.
Figure 81. TR-069 status information
Table 58 lists the TR-069 status information that the AP provides.
Table 58. TR-069 status information
Status Information
Currently Using URL
Last Attempted Contact
Last Successful Contact
Last Contact Result
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A
Description
Shows the FlexMaster server IP address or URL with
which the AP is currently registered.
Shows the date and time of the AP's last attempt to
contact FlexMaster. Date and time are specified in GMT
(or UTC), which are accurate if a Network Time Protocol
(NTP) server is configured.
Shows the date and time of the AP's last successful
contact with FlexMaster.
Shows the result of the last attempt to contact FlexMaster
(success or failure, and failure error code if applicable).
Managing the AP
Enabling Other Management Access Options
171