Ruckus Wireless ZoneFlex 7055 User Manual page 23

Table 7. ZoneFlex 7341 front panel elements (Continued)
LED
DIR LED
WLAN LED
AIR LED
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A
Description
• Off: The Access Point is not being managed by ZoneDirector
(standalone mode).
• Green: The Access Point is being managed by ZoneDirector.
• Slow flashing green (one flash every two seconds): The Access Point
is being managed by ZoneDirector, but is currently unable to
communicate with ZoneDirector.
• Fast flashing green (two flashes every second): The Access Point is
being managed by ZoneDirector and is currently receiving
configuration settings (provisioning) or a firmware update.
• Off: The WLAN service is down.
• Amber: The WLAN service is up and no clients are associated
(standalone), or no wireless clients and no downlink MAPs are
connected (RAP).
• Green: The WLAN service is up and at least one wireless client is
associated. If Mesh is enabled, no downlink MAPs are connected.
Fast flashing green : The WLAN service is up, at least one client is
•
associated, and at least one Mesh downlink is connected.
• Slow flashing green: At least one Mesh downlink is connected, and
no clients are associated.
• Off : The Access Point is operating in standalone mode or operating
as a root AP (RAP) or a non-mesh AP.
Green : The AP is functioning as a RAP or MAP and the uplink signal
•
is good.
Slow flashing green (one flash every two seconds) : Mesh
•
networking is enabled, but the AP is still searching for a mesh uplink.
Fast flashing green (two flashes every second): The AP is
•
functioning as a MAP and the wireless signal to its uplink AP is
Introducing the Ruckus Wireless AP
Getting to Know the AP Features
fair .
23