Upgrading the Firmware Image
You can use the Web interface to check for software updates/upgrades for the
firmware image built into the AP. You can then apply these updates to the device
in one of two ways: manual updating on an as-needed basis, or automating a
regularly scheduled update.
Before starting, decide which option you want to take:
• Automate a regularly scheduled update
• Run a one-time manual update right now
By default, the automatic upgrade option is disabled.
To upgrade the firmware image, go to Maintenance > Upgrade. When the Upgrade
Method options appear, decide which upgrade method to use. Each of the upgrade
options listed on the Upgrade page are discussed in the succeeding sections.
Figure 83. The Maintenance > Upgrade page
Continue with the following:
•
Upgrading Manually via FTP or TFTP
•
Upgrading Manually via the Web
•
Upgrading Manually via Local File
•
Scheduling Automatic Upgrades
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A
Managing the AP
Upgrading the Firmware Image
176