About This Guide - Ruckus Wireless ZoneFlex 7055 User Manual

About This Guide

By downloading this software and subsequently upgrading Ruckus Wireless APs to
base image 100.0.0 and later, please be advised that:
• The ZoneDirector periodically connects to Ruckus and Ruckus collects the
ZoneDirector serial number, software version and build number. Ruckus transmits
a file back to the ZoneDirector and this is used to display the current status of the
ZoneDirector Support Contract.
• The AP may send a query to Ruckus containing the AP's serial number. This allows
your AP to autonomously connect with a wireless LAN controller operated by your
choice of cloud service provider. Ruckus may transmit the Fully Qualified Domain
Name (FQDN) or IP address of the controller that the AP will subsequently attempt
to join back to the AP.
• Please be advised that this information may be transferred and stored outside of
your country of residence where data protection standards may be different.
This guide describes how to install, configure and manage Release 100.2.0 Ruckus
Wireless Indoor Access Points (APs). This guide is written for those responsible for
installing and managing network equipment. Consequently, it assumes that the
reader has basic working knowledge of local area networking, wireless networking,
and wireless devices.
NOTE If release notes are available for your product and the information there
differs from the information in this guide, follow the instructions in the release notes.
Most user guides and release notes are available in Adobe Acrobat Reader Portable
Document Format (PDF) or HTML on the Ruckus Wireless Support Web site at
https://support.ruckuswireless.com/documents
Continue with the following:
• Safety Warnings
• Related Documentation
• Documentation Feedback
• Document Conventions
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A
1
7