Preparing The Required Hardware And Tools - Ruckus Wireless ZoneFlex 7055 User Manual

Preparing the Required Hardware and Tools

You must supply the following tools and equipment:
• A notebook computer running Windows (2000/XP/Vista/7) or Mac OS X with an
Internet browser and one wireless 802.11a/b/g/n network card and one Ethernet
card installed.
• A modem (DSL or cable), router, or other device provided by your Internet Service
Provider, that brings Internet access to your site.
• (Optional) A network switch or a DSL/Internet gateway device.
• Two Ethernet cables (Cat5e or better for PoE in)
• (Optional) An AC power adapter (sold separately),
--or--
(Optional) an 802.3af or 802.3at -compliant Power over Ethernet (PoE) switch
or PoE injector.
NOTE If the AP is deployed with SCG, SZ, vSZ or ZD controllers, or with SAMs
controllers, then follow the instructions in the associated controller user documents
to connect the AP to your Ethernet network.
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A
Installing the AP
Before You Begin
77