Ruckus Wireless ZoneFlex 7055 User Manual page 128

Table 44. Common Wireless settings (Continued)
Wireless Mode
Channel
Channel Width (11n
APs only)
Country Code
CAUTION!
applicable laws. If you purchased the AP in the United States, you do not need to
set the country code manually. Ruckus Wireless devices that are sold in the US are
preconfigured with the correct country code and this setting is non-configurable.
Advanced Settings
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A
On 802.11b/g APs:
The wireless mode options include the following:
• Auto-Select: Allows both 802.11g- and 802.11b-compliant
devices to connect to the network. This is the default setting.
• 2.4GHz 54 Mbps (For faster 802.11g devices only): Allows
only 802.11g-compliant devices to join the network.
• 2.4GHz 11Mbps (For slower 802.11b devices only): Allows
only 802.11b-compliant devices to join the network.
On dual radio 802.11n APs:
On dual radio 802.11n APs, the wireless mode is determined
by radio: For the 2.4GHz radio, the mode is set to 2.4GHz
(802.11b/g/n), while for the 5GHz radio, the mode is set to 5GHz
(802.11a/n).
On the 7321:
The 7321 is a single radio 802.11n AP capable of operating in
either 2.4 or 5GHz mode. Use this setting to select 2.4GHz or
5GHz mode. Refer to
This option lets you select the channel used by the network. You
can choose
of channels. If you choose
selects the best channel (encountering the least interference) to
transmit the signal.
On 802.11n APs, the option to choose 40MHz channel width
provides (theoretically) double the data capacity of a 20MHz
channel. However, wider channel width means fewer channels
available, and more interference with other wireless signals.
This option (if enabled) lets you select your country or region
code.
Selecting the incorrect country or region may result in violation of
Refer to "Configuring Common Advanced Settings" on
page 130
"Band Selection on the 7321"
SmartSelect , or choose one of a specific number
SmartSelect , the AP automatically
.
Configuring the AP
Configuring Wireless Settings
.
128