Ruckus Wireless ZoneFlex 7055 User Manual page 155

Indoor access point
Hide thumbs Also See for ZoneFlex 7055:
Table of Contents

Advertisement

Table 54. Optional Hotspot settings (Continued)
MAC Authentication
Acct Delay Time
NAS ID
WISPr Location ID
WISPr Location Name
Location Description
Accounting Update Interval
Interim Redirect Interval
Maximum Session Time
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A
If enabled, the Hotspot service attempts to authenticate
users based on their MAC addresses if the local Hotspot
authentication has failed. If enabled, an optional MAC
authentication password can be entered. If no password
is specified, the system uses the client's MAC address
as the password.
This attribute indicates how many seconds the client has
been trying to send this record for, and can be subtracted
from the time of arrival on the server to find the
approximate time of the event generating this
Accounting-Request. When enabled, this attribute
appears in accounting request packets with a starting
value of "0", incremented each retry packet. When
disabled, this attribute is not included in any accounting
request packet.
Specify the Network Access Server identifier of this
device. The NAS-ID attribute is sent in RADIUS access
and accounting request messages. It can also be used
as location identification when NAS-IP-Address cannot
be used for this purpose.
Specify the Hotspot location identifier. This value is
provided in the RADIUS access and accounting
requests. It is recommended that the value is in the form
<ISO_Country_Code>,
of "isocc=
cc=<E.164_Country_Code>,ac=<E.164_Are
a_Code>,network=<SSID/ZONE>" .
Specify the hotspot location and operator's name. This
value is provided in the RADIUS access and accounting
requests. It is recommended that the value is in the form
<HOTSPOT_OPERATOR_NAME>,<Location >".
of "
Specify the description of location. This value is provided
in the HTTP redirection.
Specify the interval for RADIUS accounting requests.
Specify the interval after which users are redirected to
the login URL.
Enter the maximum session time in minutes.
Configuring the AP
Configuring Hotspot Service
155

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents