Zoneflex 7372-E Ap - Ruckus Wireless ZoneFlex 7055 User Manual

Introducing the Ruckus Wireless AP
Getting to Know the AP Features

ZoneFlex 7372-E AP

The ZoneFlex 7372-E is a best-performing, concurrent dual-band, mobile-ready,
two-stream AP, with two RP-SMA connectors used to support dual-band 2.4GHz
and 5GHz external antennas.
NOTE The 100.x AP base images support standalone mode and FlexMaster (FM)
WLAN manager operation. The SmartZone software-compatible images only
support SCG, SZ and vSZ controllers. The ZD-compatible images only support ZD
controllers.
The 7372-E requires a minimum of AP base image 100.0.0 and later to operate, or
SCG 2.1 and later, vSZ 2.5 and later, SmartZone software 3.2 and later, or ZD 9.6
and later to operate.
The 7372-E includes five LEDs on its front panel and buttons and connectors on its
rear panel.
Front Panel
Figure 14 shows the top view of the 7372-E. For a description of each front panel
part, refer to Table 15.
Figure 15. 7372-E top view
37
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A