Ruckus Wireless ZoneFlex 7055 User Manual page 69

Table 35. R700 rear panel elements
Number Item Name
1
2
3
4
Table 36. Behavior of Ethernet port LEDs on R700
LEDs
Off
Amber + Green
Amber
Green
WARNING!
interconnected equipment must be installed indoors within the same building,
including the associated LAN connections, as defined by Environment A of the IEEE
802.3af Standard.
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A
Description
ETHERNET + One RJ-45 port for a 10/100/1000 PoE (Power over
PoE Port Ethernet, 802.3af/at) connection. (The R700 is a Class 3
device.)
ETHERNET One RJ-45 port for a 10/100/1000 connection.
Port
12V 1.5A Power Connect the power adapter (12 VDC/1.25A) to this socket.
Socket Power can also be supplied via the ETHERNET + PoE port.
RESET Button Pressing, and then quickly releasing this internal button
reboots the AP. Pressing and holding it for six seconds
resets the AP to factory default settings.
CAUTION!
erases all settings that you configured previously.
Description
Not connected
Connected to 10Mbps device
Connected to 100Mbps device
Connected to 1000Mbps device
For units using Power over Ethernet (PoE). These products and all
Introducing the Ruckus Wireless AP
Resetting the AP to factory default settings
Getting to Know the AP Features
69