Ruckus Wireless ZoneFlex 7055 User Manual page 52

Reset Buttons
Figure 23 shows and
Figure 23. H500 side panel reset buttons
1
Table 25. H500 side panel elements
No. Item Name
1 Soft Reset and
Hard Reset
buttons
• Use a straightened paper clip to press and release the Soft Reset button for
eight seconds or more to reset the AP to factory defaults.
• Use a straightened paper clip to press and hold the Hard Reset button to reboot
the AP. This is the same as removing power and then and restoring power to the
H500.
CAUTION!
configured settings.
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A
Table 25 describes the reset buttons on the side of the H500.
Description
The two reset buttons on the side of the H500 are used to
reboot or factory reset the AP.
Resetting the AP to factory default settings erases all previously
Introducing the Ruckus Wireless AP
Getting to Know the AP Features
52