Ruckus Wireless ZoneFlex 7055 User Manual page 123

In the case of L2TP, the Ruckus Wireless AP functions as a remote bridge. As such,
it forwards traffic into PPP sessions over the L2TP tunnel. This implementation
ensures that you have complete visibility into MAC addresses of users, as individual
Wi-Fi clients are essentially placed (bridged) onto the ISP's core network.
1 Go to Configuration > Internet.
2 Under L2TP Connection, click Enable.
Figure 57. L2TP Connection
3 In L2TP Network Server IP Address, type the IP address of the L2TP network
server (LNS) to which the device connects.
4 In L2TP Network Server Password, type the L2TP server password.
5 If your network requires PPP authentication, configure the following fields under
L2TP/PPP Authentication:
• Username: Type your PPP user name.
• Password: Type the password for the account.
• L2TP Tunnel Untag VLAN ID: Enter the Untag VLAN ID for the L2TP tunnel.
6 In Close WLAN When Tunnel Fail, select Enable if you want to disable the WLAN
when the tunnel connection is lost. This prevents clients from remaining
connected to the WLAN but without Internet connectivity.
7 Click Update Settings to save your settings.
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A
Configuring the AP
Configuring Internet Settings
123