ZoneFlex 7343 AP
NOTE
The 100.x AP base images support standalone mode and FlexMaster (FM)
WLAN manager operation. The SmartZone software-compatible images only
support Ruckus Wireless SCG, SZ and vSZ controllers. The ZD-compatible images
only support ZD controllers.
The 7343 requires a minimum of AP base image 100.0.0 and later to operate, or
SCG 1.0 and later, vSZ 2.5 and later, or ZD 9.0 and later to operate.
ZoneFlex 7343 includes five LEDs on its front panel, and buttons and connectors
on its rear panel.
Front Panel
Figure 8
shows the front panel of the ZoneFlex 7343. For a description of each front
panel part, refer to
Figure 8. ZoneFlex 7343 front panel
Table 9.
ZoneFlex 7343 front panel elements
LED
PWR LED
OPT LED
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A
Table
9.
Description
• Off: Off.
• Red: Boot up in process.
• Green: On.
Not used in this model.
Introducing the Ruckus Wireless AP
Getting to Know the AP Features
25