Ruckus Wireless ZoneFlex 7055 User Manual page 131

Figure 61. The Configuration > Wireless > Advanced > Common page
2 Configure the advanced settings listed in
Table 45. Advanced common wireless settings
Option
Transmit
Power
Protection
Mode
3 Click Update Settings to save and apply the changes.
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A
Description
Full . Select the level of transmit power from the drop-
The default setting is
down menu. This option sets the maximum transmit power level relative
to the predefined power (this value differs according to the current country
code).
(Disabled by default.) If you activate protection, you control how 802.11
devices know when they should communicate with another device. This
is important in a mixed environment of both 802.11b and 802.11g/11n
clients.
Activating this option (and configuring the settings) boosts
CAUTION!
the interoperability of 802.11b and 802.11g/11n devices but severely
decreases performance.
CTS-only : Choose this option to force all destination devices to
•
acknowledge their ability to receive data when a transmission is initiated.
Use this option for compliance with the Wi-Fi Alliance certification.
RTS/CTS : Choose this option to force both sending and receiving
•
devices to confirm a data exchange on both ends before proceeding.
Configuring Wireless Settings
Table 45 as required.
Configuring the AP
131