Zoneflex 7055 Dual-Band Wired/Wireless Wall Switch - Ruckus Wireless ZoneFlex 7055 User Manual

ZoneFlex 7055 Dual-Band Wired/Wireless Wall Switch

The ZoneFlex 7055 is a multiservice 802.11n dual-band concurrent two-stream
wired/wireless wall switch.
NOTE The 100.x AP base images support standalone mode and FlexMaster (FM)
WLAN manager operation. The SmartZone software-compatible images only
support Ruckus Wireless SCG, SZ and vSZ controllers. The ZD-compatible images
only support ZD controllers.
The 7055 requires a minimum of AP base image 100.0.0 and later to operate, or
SCG 1.0 and later, vSZ 2.5 and later, SmartZone software 3.2 and later, or ZD 9.6
and later to operate.
The 7055 is designed for installation in an electrical junction box. This section
identifies the physical features the 7055. Before you begin the installation process,
Ruckus Wireless recommends that you become familiar with these features.
Front View Features
The front view of the 7055 includes four Ethernet Ports, a pass through port and a
DC in socket on the bottom front panel. Refer to
Figure 1. ZF7055 front view
5
Table 3. ZF7055 front view features
Number Name
1
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A
3
Description
Pass Through port Pass through port.
Introducing the Ruckus Wireless AP
Table 3 for more information.
4
Getting to Know the AP Features
1
2
15