Ruckus Wireless ZoneFlex 7055 User Manual page 29

Table 11. 7352 front panel elements
LED
PWR LED
OPT LED
DIR LED
WLAN LED
AIR LED
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A
Description
• Off: Off.
• Red: Boot up in process.
• Green: On.
Not used in this model.
• Off: The AP is not being managed by ZoneDirector (standalone
mode).
• Green: The AP is being managed by ZoneDirector.
• Slow flashing green (one flash every two seconds): The AP is being
managed by ZoneDirector, but is currently unable to communicate
with ZoneDirector.
• Fast flashing green (two flashes every second): The AP is being
managed by ZoneDirector and is currently receiving configuration
settings (provisioning) or an image update.
• Off: The WLAN service is down.
• Amber: The WLAN service is up and no clients are associated
(standalone), or no wireless clients and no downlink MAPs are
connected (RAP).
• Green: The WLAN service is up and at least one wireless client is
associated. If Mesh is enabled, no downlink MAPs are connected.
• Fast flashing green : The WLAN service is up, at least one client
is associated, and at least one Mesh downlink is connected.
• Slow flashing green: At least one Mesh downlink is connected, and
no clients are associated.
Off : The AP is operating in standalone mode or operating as a root
•
AP (RAP) or a non-mesh AP.
Green : The AP is functioning as a RAP or MAP and the uplink
•
signal is good.
Slow flashing green (one flash every two seconds) : Mesh
•
networking is enabled, but the AP is still searching for a mesh
uplink.
• Fast flashing green (two flashes every second): The AP is
functioning as a MAP and the wireless signal to its uplink AP is
Introducing the Ruckus Wireless AP
Getting to Know the AP Features
fair .
29