Enabling Other Management Access Options
In addition to managing the AP via a Web browser through HTTPS, several other
management access options are available on the AP. These options include
management access via HTTP, Telnet, and SSH.
You can also view and set up the connection to a Ruckus Wireless FlexMaster server
under the TR-069/SNMP Management Choice options. If your Ruckus Wireless
device is to be managed by FlexMaster, then the FlexMaster information (server URL
and contact interval) is preconfigured before you receive your Ruckus wireless
device.
NOTE
If you are configuring the AP to be managed by FlexMaster, remember to
point it to the FlexMaster server after you configure the management access options.
For more information, refer to
page
171.
1 Go to Administration > Management. The Management page appears.
Figure 80. The Administration > Management page
2 Review the access options listed in
Table 56. Management Access Options
Option
Telnet Access
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A
"Viewing FlexMaster Management Status" on
Table
Description
By default, this option is disabled (inactive).
Enabling Other Management Access Options
56, and then make changes as needed.
Managing the AP
167