Configuring Common Wireless Settings - Ruckus Wireless ZoneFlex 2925 User Manual

Configuring the Access Point

Configuring Common Wireless Settings

Configuring Common Wireless Settings
Common wireless settings are settings that are applied to all WLANs. The settings
include the wireless mode, wireless channel, and country code.
To configure the wireless settings common to all WLAN
1. Go to Configuration > Wireless. The Configuration :: Wireless :: Common page
appears.
NOTE: If you are using ZoneFlex 7962 AP, go to Configuration > Radio 2.4G or
Configuration > Radio 5G.
2. Make changes to the common wireless settings listed in the table below.
Table 15. Common Wireless settings
Setting
Wireless mode
Channel
Country Code
Advanced Settings
Description
The wireless mode options include the
following:
• Auto-Select: Allows both 802.11g- and
802.11b-compliant devices to connect to
the network. This is the default setting.
• 2.4GHz 54 Mbps (For faster 802.11g
devices only): Allows only 802.11g-
compliant devices to join the network.
• 2.4GHz 11Mbps (For slower 802.11b
devices only): Allows only 802.11b-
compliant devices to join the network
This option lets you select the channel used
by the network. You can choose SmartSelect,
or choose one of a specific number of
channels. If you choose SmartSelect, the AP
automatically selects the best channel
(encountering the least interference) to
transmit the signal.
This option (if enabled) lets you pick your
country or region code.
Refer to "Reviewing the Advanced >
Common Options" on page 47.
46