Table of Contents
Advertisement
Preparing the SC8800-S AP at the Depot and Shipping to the Field
Configuring the AP for Management by FlexMaster or for Standalone Operation
Configuring Common Wireless Settings
The settings on the Common tab are required to enable wireless devices to associate with
the AP . The default wireless settings on the AP are listed in
Table 6.
Default wireless settings
Setting
SSID (network name)
Encryption (security)
Default management IP address
NOTE: The AP has one 2.4GHz radio and one 5GHz radio. The wireless settings for each
radio need to be configured separately on the web interface. To configure the 2.4GHz
radio settings, click Configuration > Radio 2.4G . To configure the 5GHz radio settings,
click Configuration > Radio 5G .
1. On the left menu of the web interface, click Configuration > Radio {2.4/ 5} G . The
Common page appears
Figure 12.
2. Verify that the common wireless settings are configured as listed in
(Figure
The Configuration > Radio 2.4 > Common tab
Default Value
Wireless 1 to Wireless 8 (8 WLANs)
Disabled on all WLANs
192.168.0.1
12).
Table
6.
Table
7.
20
Advertisement
Table of Contents
