Configuring Wireless Settings; Configuring Common Wireless Settings - Ruckus Wireless ZoneFlex T301s User Manual

Configuring Wireless Settings

This section describes how to configure the wireless settings of the AP. There are
two types of wireless settings that you need to configure:
• Configuring Common Wireless
code, and advanced wireless settings, such as the wireless transmit power and
wireless protection mode. These settings are applied to all WLANs.
• Configuring Wireless # (WLAN Number)
tabs (Wireless 1 through Wireless 8 on the 2.4GHz radio and Wireless 9 through
Wireless 16 on the 5GHz radio) provide settings for customizing each WLAN
individually.

Configuring Common Wireless Settings

Common wireless settings are settings that are applied to all WLANs. On single-
radio APs, go to Configuration > Wireless. On dual-radio APs, you configure these
settings for the 2.4GHz and 5GHz radios independently by going to Configuration
> Radio 2.4G or Configuration > Radio 5G.
1 Go to Configuration > Wireless/Radio 2.4G/Radio 5G. The Configuration >
Wireless > Common page appears.
Figure 33. Typical Configuration > Radio 5G > Common page
Ruckus Wireless Outdoor AP 100.1.0 User Guide, 800-70863-001 Rev A
Settings: Includes the wireless mode, country
Settings: The Wireless # (WLAN number)
Configuring Wireless Settings
Configuring Common Wireless Settings
85