Upgrading Manually via FTP or TFTP
1 In the Upgrade Method options, click FTP or TFTP.
2 Click the host name field, and then type the URL of the server. Or click the IP
address field, and then type the IP address of the server. Remember to start the
URL with ftp://.
CAUTION!
entries.
3 Click Perform Upgrade. A status bar appears during the upgrade process.
4 After the upgrade is completed, you must manually reboot the AP.
Upgrading Manually via the Web
1 In the Upgrade Method options, click Web.
2 If instructed to choose a different URL than the default value, click the Web
Options URL field, and then type the URL of the download Web site. Remember
to start the URL with "http://".
3 Click Perform Upgrade. A status bar appears during the upgrade process.
4 After the upgrade is completed, you must manually reboot the AP.
Upgrading Manually via Local File
If you have already saved an image file on your local computer, then you can upgrade
directly using the Web interface.
1 In the Upgrade Method options, choose Local.
2 Click the Choose File button and locate the file on your local computer.
3 Select the file and click OK.
4 Click Perform Upgrade. A status bar appears during the upgrade process.
5 After the upgrade is completed, the AP must be rebooted.
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A
Do not change any of the Image Control File, Username, or Password
Managing the AP
Upgrading the Firmware Image
177