Pointing The Ap To Flexmaster - Ruckus Wireless ZoneFlex 7055 User Manual

Table 58. TR-069 status information (Continued)
Status Information
Current Time

Pointing the AP to FlexMaster

Your Ruckus Wireless device is required to "call home" to register with your
FlexMaster; FlexMaster does not initiate initial contact. To register successfully with
FlexMaster, your Ruckus Wireless device must know the FlexMaster server's URL,
thus entered on the device. You need TCP ports 80 and 443 between APs and
FlexMaster when traversing Layer 3/firewall boundaries.
1 Go to Administration > Management.
2 Under TR-069/SNMP Management Choice, click Auto.
3 In FlexMaster Server URL, type the URL of the FlexMaster server.
4 Toggle the Periodic FlexMaster Inform Interval drop-down list to select how
frequently the device checks the FlexMaster server for any pending configuration
changes available for that Ruckus Wireless unit. On the FlexMaster side, this
field is referred to as the Periodic Inform Interval.
5 Click Update Settings to save your changes.
After the AP registers with FlexMaster, this Administration > Management page will
show the communication status between the AP and FlexMaster.
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A
Description
Shows the current date and time as known to the AP. This
timestamp is accurate if an NTP server is configured on
the AP. If there is no NTP server configured, this timestamp
is useful as a reference for comparison of the timestamps
for Last attempted contact and Last successful
contact .
Managing the AP
Enabling Other Management Access Options
172