Figure 48. 7442 horizontal wall mount
1 Attach the brackets to the AP as shown in
2 Place the AP on the wall and mark the locations for screw holes.
3 Drill screw holes, place the AP onto the wall and insert screws.
DIN Rail Mounting
Use the DIN rail clip on the rear of the AP to connect mount to a DIN rail.
1 Remove the screw on the housing back wall and use to attach the DIN rail clip
to the rear of the AP as shown in
which fits into the corresponding slot in the housing.
Figure 49. 7441 DIN rail clip
2 Mount the AP to the DIN rail as shown in
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A
Figure
48.
Figure
49. The clip has a tab to prevent rotation
Figure
50.
Installing the AP
7441 Physical Installation
104