Ruckus Wireless ZoneFlex 7055 User Manual page 136

Figure 63. WEP settings
4 Review the encryption settings listed in
required.
Table 47. WEP Options
Encryption Setting
Authentication Mode
Encryption Strength
Key Entry Method
WEP Key
Key Index
Ruckus Wireless Indoor AP 100.2.0 User Guide, 800-70892-001 Rev A
Table
Description
Open is the only authentication mode available with WEP
encryption.
• 64 bit: Specify the key with 10 hexadecimal digits or 5 ASCII
characters.
• 128 bit: Specify the key with 26 hexadecimal digits or 13
ASCII characters. The 128-bit cryptography is stronger
privacy protection for your network and is recommended if
you use WEP.
• Hexadecimal: The encryption key only accepts
hexadecimal characters (0-9, A-F).
• ASCII Text: The encryption key accepts ASCII characters.
Enter the key manually according to the Key Entry Method
and Encryption Strength settings.
Choose the index, from "1" to "4", that the WEP key is to be
stored in.
Configuring the AP
Configuring Wireless Settings
47, and then make changes as
136