Fine Programmed Scan - Icom IC-7851 Instruction Manual

12
SCANS

■ Fine Programmed scan

In the Fine Programmed scan, the scan speed de-
creases when the squelch opens, but the transceiver
keeps scanning. The scanning tuning step changes to
10 Hz when the squelch opens.
 The Multi-function screens are OFF.
q
Push [SCAN](F).
• The Scan screen is displayed.
w
Set for a Programmed scan as described on
12-5.
e
Push [PROG](F).
• The Programmed scan starts.
•
" " and decimal points blink while scan-
PROGRAM SCAN
ning.
r
Push [FINE](F).
• The Fine programmed scan starts.
•
"
FINE PROGRAM SCAN
• Push [FINE](F) to release the Fine Programmed scan.
• Push [PROG](F) to cancel the scan
• Rotating [MAIN DIAL] also cancels the scan.
• Hold down [RECALL](F) for 1 second to recall the fre-
quencies that are set before starting the scan (P1 and
P2), if desired.
When the scan detects a signal, the scan speed de-
creases but the scan does not stop.
" blinks.
(F) Function keys
page
• While scanning
Blinks
12-6
[V/M]
[EXIT/SET]
Mode keys
Blinks
[TS]
[MAIN DIAL]